Oehler Research · Accessories and Spares
Skyscreen III Orange Diffuser
Evens out skylight into the sensor; the wear part that decides how a Skyscreen III performs in poor light.
The orange diffuser looks like a piece of plastic, but it sets the conditions under which a Skyscreen III still triggers reliably. It spreads skylight evenly into the sensor: the translucent blaze-orange material raises sensitivity in overcast, early and late light, and the wide roof shields the lens from midday glare. Too little light and too much direct sun are the two failure modes of a skylight sensor; the diffuser handles both. Three interlocking parts, no metal, no glue: it packs flat, travels well and never loosens as an adhesive ages. A normal wear item; keep spares for range work. Fits every Skyscreen III body.
Overview
A skylight sensor is only as good as its background light. Too dark, and a passing bullet's shadow does not change the signal enough to trigger. Too bright and directional, and direct sun saturates the detector. The orange diffuser is built for both ends: the translucent orange material evens out scattered light and raises contrast, so overcast days, dawn and dusk stay usable, while the integrated roof blocks midday glare. With no metal and no adhesive, it packs flat, survives transport and will not come loose as glue degrades in heat and humidity. Sun, dust and knocks wear it down, so it is a consumable. When sensitivity drops, check the diffuser first.
Key specifications
| Material | Translucent orange material for better low-light sensitivity |
|---|---|
| Construction | Three interlocking parts, no metal, no adhesive |
| Sun shield | Roof design suppresses midday glare |
| Weather | Does not flutter in wind; stable in long outdoor use |
| Compatibility | Fits all Skyscreen III bodies |
| Type | Normal wear item; keep spares |
Features
Better sensitivity in low light
Triggers reliably in overcast, early and late light, extending the usable hours of each day.
Roof blocks midday glare
Keeps direct sun off the detector so bright conditions stay workable.
Three interlocking parts, packs flat
Hard to damage in transit; easy to carry to the range.
No metal, no adhesive
Nothing to rust or come unglued; holds up outdoors over years.
Fitting and related spares
Fit · FIT
Mounts on top of the Skyscreen III body
Diffuser and roof form the sensor's light path; seat it fully when replacing, since position and angle affect sensitivity.
Related · RELATED
Case and lens spares
If sensitivity drops and the diffuser is not the cause, check the case and lens for damage as well.
Range · RANGE
Ranges and proving grounds
Outdoor velocity, time-of-flight and impact work needs sensors that tolerate sun, dust and muzzle blast, and a controller that runs all day.
QA
Ammunition line QA
Batch sampling and type approval need a repeatable baseline; per-shot records support trends and traceability.
Options and configuration
The diffuser is a wear item, supplied at factory quotation. Ask for the quantity you need; Evencat confirms lead time.
Standard (included)
Options and extensions
Service and support
Downloads
- Manufacturer product pageOehler Research · Full specifications
- Skyscreen III product pageOehler Research · Full specifications
Evencat supplies and quotes Oehler Research, Inc. (Austin, Texas) products in Taiwan, with selection advice, supply assessment and operator training.
Need pricing, specifications or lead time for oehler-diffuser?