A measurement instrument is only worth what its number can be trusted for. The three lines we carry each answer one specific way that number goes wrong: long-term drift in time and frequency, the safe-current limit when measuring the resistance of an igniter, and the extrapolation error that comes from ballistic coefficients measured only over short range.
We join at the selection stage. We first confirm the quantity you need to measure, the target uncertainty and the site conditions, then settle on a model. After delivery, the same engineers handle calibration traceability, firmware updates and measurement questions. Pendulum counters and AMPTEC safety ohmmeters are also available for short-term rental.
Each product line maps to one specific measurement difficulty, not to a catalog
Problem: oscillators drift, and how much they drift depends on how long you observe them. A single reading tells you nothing about stability.
Approach: multi-channel, zero-dead-time measurement gives continuous data. Allan deviation describes stability at each averaging time. A GNSS-disciplined rubidium reference provides a base traceable to UTC.
Calibration labs · 5G and satellite communications · Aerospace electronics · Oscillator manufacturing
Pendulum product lineProblem: when measuring an igniter bridgewire, an ordinary meter can source enough current to fire the device under test. Bonding resistance, at the other end, is so low that lead resistance swamps it.
Approach: intrinsically safe models limit the test current to far below the no-fire threshold and carry explosion-protection certification. For low resistance, four-wire Kelvin measurement removes lead and contact resistance from the reading.
Pyrotechnics and munitions · Aerospace bonding acceptance · Lightning-protection inspection · Hazardous-area work
AMPTEC product lineProblem: published ballistic coefficients are mostly measured over short range, so the error grows when you extrapolate to long range. Recording only the peak chamber pressure hides how the charge actually behaves.
Approach: measure muzzle velocity and downrange time of flight together to obtain a measured ballistic coefficient. Sample chamber pressure on two synchronized channels at microsecond resolution to recover the full pressure-time curve.
Ammunition development and acceptance · Defense proving grounds · Sports equipment coefficient of restitution (COR)
Oehler product lineFrom instrument sales to technical support, handled by one team
We compare specifications against your measurement need, budget and application, and recommend the right model and options so you do not buy the wrong instrument or overpay.
Free consultationGenuine Pendulum, AMPTEC, Mi-Wave and ABI products through their authorized channel in Taiwan, with quotation, lead time and import handled in one place. Pendulum and AMPTEC units can also be rented short term.
Browse productsWe arrange instrument calibration and measurement traceability, so you hold calibration documents traceable to UTC or national standards for quality and audit requirements.
Learn moreManufacturer warranty support and a single repair contact. Our team assists with fault diagnosis, parts replacement and functional verification to keep downtime short.
Repair inquiryInstallation and setup, operator training and application advice, so your team is productive with the instrument quickly and uses its full capability.
Contact usMulti-vendor instrument integration, signal distribution and rack layout planned to your requirement, including measurement-system design and custom integration work.
Discuss a projectFive clear steps, from first requirement to after-sales support
We learn your measurement need, specification and budget
We recommend the model and options and issue a formal quotation
Genuine product delivered, installed and configured on site
Operator training and application guidance
Warranty, calibration, repair and long-term technical support
More than a supplier: a long-term measurement partner, from genuine instruments to a technical contact who helps you build measurement capability you can rely on.
Authorized distributor in Taiwan for Pendulum, AMPTEC, Mi-Wave and ABI; Oehler products supplied and quoted directly from the manufacturer. Genuine units with full warranty, no grey-market risk.
The only distributor for AMPTEC igniter testers and safety ohmmeters in Taiwan, with support that other channels cannot provide.
We work directly with each manufacturer's engineering team, so unusual specifications, custom requests and firmware questions get a qualified answer fast.
Long-standing work in electronics manufacturing, aerospace and defense, telecom and satellite, and academic research. We know the measurement pain points and standards of each.
Our engineers are available to talk through your application and help you find the right instrument and configuration
