Oehler Research · Accessories and Spares
Skyscreen Tripods / 4 ft Rail
Pressed dimples preset the spacing of three screens. Screen spacing is the denominator of every velocity reading.
Tripods and rail are the foundation of a Skyscreen setup, offered as a pair of folding stands (Skyscreen Tripods) or as adjustable tripods with a 4 ft rail. The rail is 1/2 inch EMT conduit with three precisely pressed dimples that mark the positions of the three screens. This is an accuracy part, not a convenience: screen spacing is the denominator of the velocity calculation, and any tape-measure error passes into the reading at the same ratio. The adjustable version adds height adjustment for uneven ground on outdoor ranges.
Overview
Velocity is distance divided by time. Oehler's timing is very precise, so the main uncertainty is usually distance: the actual spacing between screens. Measure with a tape and a 1% spacing error is a 1% velocity error, far larger than the instrument's typical 0.25%. The factory rail is 1/2 inch EMT conduit with three pressed dimples; the screens drop in and setup is done, with nothing to measure or align. The folding pair suits flat ground and portable work. The adjustable tripods with 4 ft rail add height adjustment, so the rail can be leveled on a slope, avoiding the effective-spacing error of a tilted screen plane. The stiff EMT rail keeps its dimple positions over years of use.
Key specifications
| Version 1 | Skyscreen Tripods (Pair): a pair of folding stands |
|---|---|
| Version 2 | Adjustable Tripods with 4′ Rail: adjustable tripods with 4 ft rail |
| Rail material | 1/2 inch EMT conduit with locating dimples |
| Locating | Dimples preset the exact spacing of three Skyscreens |
| Adjustment | Adjustable version offers height adjustment for uneven ground |
| Compatibility | Skyscreen III series and the rail system supplied with the Model 35 |
Features
Dimples set the accuracy
Screen spacing is the denominator of the velocity calculation; rated accuracy without measuring on site.
Adjustable version for rough ground
Level the rail on slopes or uneven terrain and avoid effective-spacing error from a tilted screen plane.
Folds for transport
Quick to deploy and pack for portable work.
Stiff EMT conduit
Resists bending in long use, so the dimple positions stay put.
Mounting hardware and applications
Locating part · RAIL
Side rail holds lateral position
Works with the 4 ft main rail to fix screen attitude. Rail parts are accuracy parts: replace when bent or lost, never substitute.
Setup · SETUP
Screens drop into the dimples
No tape, no alignment. The three screens sit at the same spacing every time, so results compare across dates.
Range · RANGE
Ranges and proving grounds
Outdoor velocity, time-of-flight and impact work needs sensors that tolerate sun, dust and muzzle blast, and a controller that runs all day.
R&D
Development and load validation
Comparing loads, bullet profiles and barrels only works when the system's own uncertainty is far below the differences under test.
Options and configuration
Tick what you need; the list goes into the quote request form. Oehler quotes case by case, and lead time follows the factory's reply.
Standard (included)
Options and extensions
Service and support
Downloads
- Manufacturer product pageOehler Research · Full specifications
- Skyscreen III product pageOehler Research · Full specifications
Evencat supplies and quotes Oehler Research, Inc. (Austin, Texas) products in Taiwan, with selection advice, supply assessment and operator training.
Need pricing, specifications or lead time for oehler-tripod?