OEHLER

Skyscreen III

Overview, specifications and how to request a supply assessment and quote

Oehler Research · Sensors and Screens

Oehler Skyscreen III

A passive screen lit by scattered skylight, shipped with Oehler chronographs since 1984 and the industry's standard sensor for outdoor velocity work.

Skyscreen III needs no light source of its own. It uses scattered skylight as the background and triggers when the projectile shadows the lens, so an outdoor range does not need power or lamps at the sensors. The body is polycarbonate and stands up to .50 BMG muzzle blast. It mounts with a single 1/4"-20 screw, no tools, and does not snap off easily; compared with the four-screw designs of other makers, the difference in swap time on the range is obvious. The blaze orange translucent diffuser raises trigger sensitivity noticeably on overcast days and at dawn and dusk, while the roof cuts glare from direct midday sun. Improved cable shielding sharply reduces false triggers from static and electrical noise. Suitable for archery, airguns, handguns, shotguns and rifles.

Overview

Skyscreen III is the sky-lit screen sensor Oehler has shipped with its chronographs since 1984. The design trade-off is plain: it gives up an active light source for easy outdoor setup, at the cost of needing usable skylight, so indoor or night work should switch to Model 57 infrared screens. The polycarbonate body tolerates .50 BMG muzzle blast; a single 1/4"-20 screw holds it, installs without tools, and resists breaking when knocked on the range. The orange diffuser is three interlocking parts with no metal and no adhesive, so it packs flat and survives transport; its job is to even out the scattered skylight entering the screen, which raises sensitivity in low light, and its roof suppresses midday glare. For setup, the Model 35 ships with a 4 ft rail made from 1/2 in EMT conduit with dimples that fix the correct spacing of the three screens, plus two folding stands. Spacing is the denominator of the velocity calculation, so using the factory rail is the condition for reaching the rated accuracy. Evencat supplies and quotes Skyscreen III in Taiwan.

Oehler Skyscreen III

Key specifications

TypePassive screen sensor lit by scattered skylight (shipped with chronographs since 1984)
MaterialPolycarbonate body, tolerates .50 BMG muzzle blast
MountingSingle 1/4"-20 screw, no tools, resists breaking
DiffuserBlaze orange translucent material, better sensitivity in low light; roof suppresses midday glare
Diffuser constructionThree interlocking parts, no metal or adhesive, packs flat
RailModel 35 ships with a 4 ft rail (1/2 in EMT conduit) with dimples that fix the spacing of the three screens
StandsUsed with two folding stands
Suitable forArchery, airguns, handguns, shotguns, rifles

Features

Passive, lit by the sky

No lamps or power to run outdoors; setup is a matter of placing and aligning.

Single screw, no tools

Quick to swap on the range, saving real setup time over four-screw designs.

Tolerates .50 BMG muzzle blast

The polycarbonate body sits in front of large-caliber muzzles without deforming.

Orange diffuser plus roof

More sensitivity in low light, less glare at midday, so both ends of the day are workable.

Improved cable shielding

Far fewer false triggers from static and electrical interference.

Accessories and setup

Skyscreen III orange diffuser

DIFFUSER

The orange diffuser sets low-light performance

It evens out scattered skylight before it reaches the screen, which raises trigger sensitivity on overcast days and at dawn and dusk. It is a normal wear item, so keep spares.

BODY · CASE

Polycarbonate case and lens

A damaged body can be replaced on its own, with or without the lens; the replacement keeps the factory optical geometry, so accuracy is unchanged.

Skyscreen III case and lens
Skyscreen side mounting rail

MOUNTING

The rail dimples are the measurement reference

Screen spacing is the denominator of the velocity calculation, so setup error goes straight into the result; the factory rail is what keeps the rated accuracy.

RANGE MEASUREMENT · RANGE

Ranges and proving grounds

Muzzle velocity, time of flight and impact measurement outdoors call for sensors that survive sun, dust and muzzle blast, plus a controller that runs for hours on its own power.

Firing range and defense test site

Options and configuration

Tick the items you need and we will compile the configuration into the inquiry form. Oehler products are quoted case by case by the manufacturer; lead time is as confirmed by Oehler.

Standard equipment (included)

Skyscreen III body (polycarbonate)Single 1/4"-20 screw mount, tolerates .50 BMG muzzle blast.
Orange diffuser with roofThree interlocking parts, no metal or adhesive.
Improved shielded cableFewer false triggers from static and electrical noise.

Options and add-ons

Service and support

0 options selected Standard configuration only
Add configuration to quote request

Downloads

Evencat supplies and quotes Oehler Research, Inc. (Austin, Texas, USA) products in Taiwan, and provides selection advice, supply assessment and training.

Supplied and quoted by Evencat
Manufacturer technical support
Reply within 24 hours
Manufacturer warranty

Need pricing, specifications or lead time for skyscreen3?

Request a quote